Model Number: TE05-0501
Product Name: 2K Mold
Brand Name: TTM
Mould Type: 2K Over Molding Mould
Mould Base: LKM, HASCO, DME, C50 standard mould base.
Mould Material: H13, 1.2344, 1.2738, P20, 45# according to customers’ requirement.
Mould Cavity: 4 Cavities
Mould Life: 100,000~500,000shots according to your requirement.
Mould Standard: HASCO, DME, MISUMI, LKM
Mould Size:
Plastic Parts Material: ABS, PP, PC, PA, PA66, POM, etc.
Port: Shenzhen
Lead Time: 4~5weeks
| Brand | TTM |
| Mould Base | LKM, HASCO, DME, C50 standard mould base |
| Mould Material | H13, 1.2344, 1.2738, P20, 45#, etc., according to customers’ requirement. |
| Mould Standard | HASCO, DME, MISUMI, LKM, etc. |
| Product Material | ABS, PP, PC, PA, PA66, POM, etc. |
| Runner | Cold/Hot Runner |
| Gate Type | Side gate, sub gate, pin point gate, edge gate, etc. |
| Mould Size(min) | 150*150mm |
| Mould Size(max) | 1600*1200mm |
| Mould Weight | 50~15,000 kg |
| Injection Machine Type | 80~1500ton |
| Certification | ISO9001:2015 |
| Lead Time | 3~6weeks according to the product |
Two-shot high-precision injection molding is available
If you need to produce custom parts with multiple colors and different material characteristics, you may consider 2K, two-shot, or bi-injection molding. Unlike traditional processes, this technique involves the use of two barrels and nozzles in a single unit. Thus, two materials, that vary in colors, hardness features, and molecular structures, are injected into a mold one after another to form a unique plastic blend.
Our technology for two-shot precision injection molds ensures the flawless production of complex parts with enhanced copolymerization features. They are of importance when creating colorful designs and appealing styles. As part of bi-injection service, we use TPEs and plastics in a single cycle to improve your parts’ features in terms of:
– durability
– integrity
– aesthetic appeal
– material compatibility
It goes without saying that you’ll enjoy massive savings with our bi-injection service. As the end product is made close to perfection, you won’t have to spend much time assembling and finishing. These and many other production processes will be greatly optimized.
Stable production processes and high efficiency
Lower part cost compared with overmolding and assembly parts
Enhanced tactile and cosmetic product features
High precision and stable part quality
Improve the touch feel
Expanded design possibilities
Optimum bonding with minimum time and labor
2K injection mold and 2K injection molding process cost is higher than single injection molding, but the cost can be covered because of the assembly cost.
The combination between 2 plastic materials must be good
It will take about 2-5 days for us to make 3D mould design , it will depend on how many sets of molds and how complexity of the mold.
If customer confirmed our 3D design, we ‘ll make 2D drawing with the BOM for our customer to check all of components steel material specification .
If the part is complexity , or the filling speed is hard to confirm, we could offer the mold analysis report to customer .
To be always able to deliver high quality mould an plastic products to our customers, the highest level of quality assurance is essential for us .
This starts with the contract review over the entire project cycle and ends with the shipping process.
We have therefore implemented a Quality Management System according to ISO 9001:2015 allowing for continuous improvement of our processes.
