Model Number: TE02-051
Product Name: Automotive Mould
Brand Name: TTM
Mould Type: Plastic Injection Mould
Mould Base: LKM, HASCO, DME, C50 standard mould base.
Mould Material: H13, 1.2344, 1.2738, P20, 45# according to customers’ requirement.
Mould Cavity:
Mould Life: 100,000~500,000shots according to your requirement.
Mould Standard: HASCO, DME, MISUMI, LKM
Mould Size:
Plastic Parts Material: ABS, PP, PC, PA, PA66, POM, etc.
Port: Shenzhen
Lead Time: 4~5weeks
Brand | TTM |
Mould Base | LKM, HASCO, DME, C50 standard mould base |
Mould Material | H13, 1.2344, 1.2738, P20, 45#, etc., according to customers’ requirement. |
Mould Standard | HASCO, DME, MISUMI, LKM, etc. |
Product Material | ABS, PP, PC, PA, PA66, POM, etc. |
Runner | Cold/Hot Runner |
Gate Type | Side gate, sub gate, pin point gate, edge gate, etc. |
Mould Size(min) | 150*150mm |
Mould Size(max) | 1600*1200mm |
Mould Weight | 50~15,000 kg |
Injection Machine Type | 80~1500ton |
Certification | ISO9001:2015 |
Lead Time | 3~6weeks according to the product |
We develop and manufacture moulds for many different industries such as automotive, medical, industry, intelligent housing device, home appliances, commercial electronics, etc. Mould types include plastic and alloy mould, HASCO/DME standard mould, hot runner mould, double injection mould, etc.
TTM standard runs under ISO9001:2015 quality management system. We focus on customer demands and regard quality as the foundation for our long-term stable development, setting up independent quality departments for mould manufacturing and injection molding. We sincerely hope we can cooperate with you to reach the goal of win-win cooperation.
It will take about 2-5 days for us to make 3D mould design , it will depend on how many sets of molds and how complexity of the mold.
If customer confirmed our 3D design, we ‘ll make 2D drawing with the BOM for our customer to check all of components steel material specification .
If the part is complexity , or the filling speed is hard to confirm, we could offer the mold analysis report to customer .
To be always able to deliver high quality mould an plastic products to our customers, the highest level of quality assurance is essential for us .
This starts with the contract review over the entire project cycle and ends with the shipping process.
We have therefore implemented a Quality Management System according to ISO 9001:2015 allowing for continuous improvement of our processes.